Welcome, guest | Sign In | My Account | Store | Cart

Notice! PyPM is being replaced with the ActiveState Platform, which enhances PyPM’s build and deploy capabilities. Create your free Platform account to download ActivePython or customize Python with the packages you require and get automatic updates.

pypm install dzenstatus

How to install DzenStatus

  1. Download and install ActivePython
  2. Open Command Prompt
  3. Type pypm install dzenstatus
 Python 2.7Python 3.2Python 3.3
Windows (32-bit)
0.1.4 Available View build log
0.1.3 Failed View build log
Windows (64-bit)
0.1.4 Available View build log
0.1.3 Failed View build log
Mac OS X (10.5+)
0.1.4 Available View build log
0.1.3 Failed View build log
Linux (32-bit)
0.1.4 Available View build log
0.1.3 Failed View build log
Linux (64-bit)
0.1.4 Available View build log
0.1.3 Failed View build log
Lastest release
version 0.1.4 on Jan 5th, 2011

DzenStatus is a configurable python script meant to drive a statusbar program like dzen, for use with window-managers like xmonad or ratpoison. It is still in early development, so your mileage may vary. (Do email me with bugs or, preferrably, patches if you find breakage.)

Additional documentation will be added to the wiki as it is produced.

So without further ado...


Version 0.1.4
  • Fix packaging. Should now actually be installable with easy_install or pip.
Version 0.1.3
  • Make simple changes to run on python3 and python2.6 or higher.
  • Added a simple mpd plugin, requires python-mpd to work. (No dependency has been added, you can safely ignore the plugin entirely without any ill effects, but python-mpd is required to use the plugin.)
Version 0.1.2
  • Fix hardcoded battery and AC adaptor names in the battery plugin.
Version 0.1.1
  • Fixed an issue with trying to be too smart with encodings.
Version 0.1.0
  • Initial release.


Installing DzenStatus should be a simple matter of using pip (or easy_install if you must):

pip install DzenStatus

If you don't want, or can't, install using easy_install then, assuming you have setuptools installed (which is required for DzenStatus to run, or at least pkg_resources), you can download the egg-file, mark it executable (or eggsecutable, as it were), and run it directly. This is not recommended. Source distributions are also provided. (python setup.py install)


Setuptools is required for DzenStatus to work, in particular, it uses the pkg_resources entry point tools to discover and load plugins. There are no other requirements (other than a python installation). This requirement is fulfilled by the Setuptools fork, Distribute.

After installing with easy_install you should have two new commands in your path, dzenstatus and dzenstatus_pipe. The dzenstatus command runs the configured statusbar program (from the configuration file), typically dzen and directly pipes it's output to the standard in of that process.

dzenstatus_pipe is available for those who would rather pipe the output of dzenstatus to its destination manually (helpful if you want to integrate DzenStatus into an existing statusbar script).


DzenStatus is configured by a single configuration file located in ~/.dzenstatus/config.ini. The configuration file uses the standard python ConfigParser format. An example configuration file is available in the distribution.

Full documentation for each plugin is provided in the source code as docstrings.

Running DzenStatus

Once you have a configuration you like, you can add it to your .xinitrc or .xsession file in several different ways:


This is the simplest way, just invoking DzenStatus, letting it take care of all the statubar startup and not using a plugin that reads from standard input. If you have a window manager that writes useful information to standard output you may wish to capture it like so (assuming you have a suitable DzenStatus plugin configured to read standard input):

/path/to/my/wm | dzenstatus

If you wish to have DzenStatus write it's output directly to standard output, instead of spawning the statusbar program itself, you would use something like:

/path/to/my/wm | dzenstatus_pipe | /path/to/my/statusbar_sink

It is also possible to use a FIFO (named pipe) to allow you to restart DzenStatus without restarting the window manager yet keeping the ability to read the output.

mkfifo .status_fifo
cat .status_fifo | dzenstatus&
/path/to/my/wm > .status_fifo

Or you can tell DzenStatus to directly read the FIFO with the read_fd plugin, instead of reading from standard input.

mkfifo .status_fifo
/path/to/my/wm > .status_fifo

Writing DzenStatus Plugins

DzenStatus uses pkg_resources to load plugins, so writing a plugin doesn't require you to patch or modify the base DzenStatus installation at all.

Plugin Structure

A plugin will be found by DzenStatus if it declares an entry point for dzenstatus.plugins.v1 (where the v1 is the version number of the plugin interface). The entry point must be a callable that takes a dictionary mapping strings to strings of configuration data, and returning a tuple of three elements:

  • The configured name of the instance of the plugin (passed in as config['name']).
  • The update predicate of the plugin instance. This must be a callable taking two arguments, the current seconds since the epoch, and the last time (in seconds since the epoch) an update was checked for.
  • The update function this is a callable that takes no arguments and returns a string that will be included for this instance of the plugin in the output. It should not contain newlines.

As an example, let's reimplement the static plugin that is already included with DzensStatus.

First, since DzenStatus uses entry points, we need a setup.py file:

#!/usr/bin/env python

from setuptools import setup

    name = "ExampleDzenStatusPlugin",

    version = "0.0 example",
    packages = find_packages(),

    entry_points = {
        'dzenstatus.plugins.v1' : [
            'example_static = example_dzenstatus:example_plugin_static',

    description = "A minimal example plugin for DzenStatus",
    license = "GPL",

The key thing to note is how to declare the entry point for the plugin. All the other parts are standard setuptools that you should already be familiar with.

Now the implementation of our plugin:

# example_dzenstatus.py
    An example DzenStatus plugin.
from dzenstatus import UPDATE_ONCE

def example_plugin_static(config):
        A simple plugin that returns static text.

        text is the only required config parameter.
    return (config['name'], UPDATE_ONCE(), lambda: config['text'])

Now, you can install the plugin using easy_install or by running the setup.py file.

$ python setup.py develop

Now, you can place a section into your DzenStatus config file that looks like:

text=I'm an example!

If you run DzenStatus you will now see that the plugin is loaded and the text is output.

The simplest way to distribute your plugin is via an egg that is placed in the plugins directory configured by the config file. This requires no additional installation and makes the installation as easy as copying a file.

See the code of DzenStatus for more examples (especially for how to deal with file descriptors and polling for available input).

Subscribe to package updates

Last updated Jan 5th, 2011

Download Stats

Last month:1

What does the lock icon mean?

Builds marked with a lock icon are only available via PyPM to users with a current ActivePython Business Edition subscription.

Need custom builds or support?

ActivePython Enterprise Edition guarantees priority access to technical support, indemnification, expert consulting and quality-assured language builds.

Plan on re-distributing ActivePython?

Get re-distribution rights and eliminate legal risks with ActivePython OEM Edition.