Popular recipes tagged "linux" but not "python"

A white noise generator to sooth baby to sleep. (Bash)

2017-05-13T12:12:30-07:00

Bash recipe 580801 by Barry Walker (alarm, apple, audio, baby_alarm, cygwin, linux, noise, sleep, sound, whitenoise).

This is a simple BASH, DASH and SH script to sooth a newborn baby to sleep for a laptop with a builtin mic. Develeoped around an Apple MacBook Pro.

Usage:- [./]shush.sh <time in seconds from 18 to 2700> [sensitivity [Hh|Mm|Ll]]<CR>

If time is omitted it defaults to 2 bursts of 9 seconds each and if sensitivity is omitted defaults to [M]edium.

It uses Quicktime Player for Apple OSX 10.12.4 minimum /dev/dsp for CygWin and some Linux flavours and arecored for Linux ALSA machines for baby awake detector.

Upon the two arguments the white noise generator runs for approximately the time given in $1 in bursts of 9 seconds until the time limit is reached. $2 is used to detect of baby is awake and reruns the noise generator again with a new noise waveform.

Enjoy...

A utility like Unix seq (command-line), in Python (Python)

2017-01-08T17:48:57-08:00

Python recipe 580744 by Vasudev Ram (bash, command, commandline, linux, script, seq, sequence, shell, unix, utilities, utility).

This recipe shows how to create a utility like Unix seq (command-line), in Python. seq is described here:

https://en.wikipedia.org/wiki/Seq_(Unix)

but briefly, it is a command-line utility that takes 1 to 3 arguments (some being optional), the start, stop and step, and prints numbers from the start value to the stop value, on standard output. So seq has many uses in bigger commands or scripts; a common category of use is to quickly generate multiple filenames or other strings that contain numbers in them, for exhaustive testing, load testing or other purposes. A similar command called jot is found on some Unix systems.

This recipe does not try to be exactly the same in functionality as seq. It has some differences. However the core functionality of generating integer sequences is the same (but without steps other than 1 for the range).

More details and sample output are here:

https://jugad2.blogspot.in/2017/01/an-unix-seq-like-utility-in-python.html

The code is below.

A pseudo-echo, (or printf), function for any Python version. (Python)

2017-01-20T22:17:23-08:00

Python recipe 580750 by Barry Walker (amiga, apple, demo, echo, fs_uae, linux, printf, unix, windows, winuae).

A simple example of having a pseudo-echo using sys.stdout.write...

This gives exactly the same results from Python Versions, 1.4.0, 2.0.1, 2.5.6, 2.6.9, 3.4.3 and 3.5.2 on various platforms including the classic AMIGA A1200.

Enjoy finding simple solutions to often very difficult problems...

Bazza.

A simple raw hexdumper. (Python)

2016-09-19T13:24:37-07:00

Python recipe 580697 by Barry Walker (amiga, apple, fs_uae, hex, hexdump, linux, macbook_pro, raw_hexdump, unix, windows, winuae).

This is not a hexreader. This code creates a raw hexdump of a binary file that is whitespace, optional, delimited. The dump is saved into the current directory with a ".hex" extension.

It works on just about any current platform but is designed around a stock Amiga A1200(HD) with Python 1.4.0. It also works on the current stable version 3.5.2.

I needed a hexdump some years ago for banging the Amiga hardware, and decided to modify recently for another usage but it had to still work on version 1.4.0 for the classic A1200.

Enjoy...

data_dump.py, like the Unix od (octal dump) command (Python)

2015-11-01T12:43:38-08:00

Python recipe 579120 by Vasudev Ram (data, dump, hexadecimal, linux, octal, od, representation, unix, utility, windows).

This recipe implements a simple data dump tool, roughly like the od command of Unix, which stands for octal dump (though od can also dump data in hex and other formats). This tool dumps data in character and hex formats, in this version. This is data_dump.py version 1.

A UNIX-like "which" command for Python (Python)

2015-03-20T19:23:45-07:00

Python recipe 579035 by Vasudev Ram (bash, commandline, commands, linux, shell, unix, utilities, which).

UNIX users are familiar with the which command. Given an argument called name, it checks the system PATH environment variable, to see whether that name exists (as a file) in any of the directories specified in the PATH. (The directories in the PATH are colon-separated on UNIX and semicolon-separated on Windows.)

This recipe shows how to write a minimal which command in Python. It has been tested on Windows.

A script to automate installing MTS Mblaze UI in linux (Bash)

2015-07-29T18:26:59-07:00

Bash recipe 579039 by Emil george james (internet, linux, script, shell, web).

An automate shell linux script to install mts mblaze ui application in all linux distros.this shell script automatically install the mts mblaze ui in your linux systems .installation script will setup everything need to choose some option interactively from setup.Script can work for all linux environments.

A Function To Create A 1 Second Sinewave WAVE Beep File. (Python)

2014-11-23T19:24:46-08:00

Python recipe 578971 by Barry Walker (amiga, apple, audio, beep, error_beep, error_sound, e_uae, linux, sinewave, sound, wav, wave, windows, winuae).

sinebeep.py

Creating an audio file called...

beep.wav

...that can be played using almost ANY audio player available.

This simple snippet of code generates a 1 second sinewave WAVE file. It IS saved inside the CURRENT drawer so that you can find it... ;o)

This works on:- Classic stock AMIGA A1200, using Python 1.4.0. WinUAE and E-UAE, AmigaOS 3.0.x using Python 1.4.0 to 2.0.1. Windows, to at least 7, using Python 2.0.1 to 3.3.2. Various Linux flavours using Python 2.4.6 to 3.2.2. Apple OSX 10.7.x and above using Python 2.5.6 to 3.4.1.

The file size is 8044 bytes and _IF_ you need to it can be palyed directly without a player on some Linux flavours that have the /dev/dsp device. It is an 8 bit, unsigned integer, mono, 8000Hz sampling speed 8000 byte RAW file with the WAVE header added.

It will still work with PulseAudio and OSS using...

cat /full/path/to/beep.wav > /dev/dsp

...but with a momenatry click due to the 44 header bytes; but hey it is a beep alternative...

Enjoy finding simple solutions to often very difficult problems.

Bazza.

Daemon to create a wifi hotspot on linux (Python)

2014-07-08T04:45:27-07:00

Python recipe 578904 by Prahlad Yeri (hotspot, linux, wifi).

This recipe is based on Hotspotd, a small linux daemon to create a wifi hotspot on linux. It depends on hostapd for AP provisioning and dnsmasq to assign IP addresses to devices.

Hotspotd works by creating a virtual NAT (Network address transation) table between your connected device and the internet using iptables.

Simple Bash Text Mode Sine Curve Generator. (Bash)

2014-08-12T20:57:39-07:00

Bash recipe 578921 by Barry Walker (apple, bash, cygwin, graph, linux, macbook_pro, text). Revision 2.

This bash script is a taster for a kids level, audio, text mode, sweep generator. The code just creates a single cycle of a quantised sine curve inside an 80 x 24 bash terminal. This will be the calculator for a sinewave sweep generator from about 50Hz the 12KHz... The code tells you more and the display is in comments at the end...

A Bash Beep Command For OSX 10.7+... (Bash)

2014-02-27T19:36:17-08:00

Bash recipe 578837 by Barry Walker (apple, audio, bash, beep, error_beep, error_sound, linux, macbook_pro, sound).

This small bash script generates an 8044 byte 1KHz sinewave wave file and immediately plays it. The file created is a _pure_ sinewave and lasts for 1 second. It uses the default "afplay" command to run the generated file.

It was designed around an Apple Macbook Pro but using "aplay" it might even work on other *nix flavours from the command line. I have not bothered to try it as this was purely for my MB Pro.

The wave file can be found as "/tmp/sinewave.wav" during the working session(s) and can be saved anywhere of your choice.

Enjoy...

(Watch for word wrapping etc...)

Bazza.

Simple Text Mode Digital Oscilloscope Graphics DEMO. (Python)

2014-01-21T19:07:49-08:00

Python recipe 578812 by Barry Walker (apple, demo, graphics, linux, macbook_pro).

This is a DEMO to switch a *NIX terminal from text to _graphics_ mode on the fly.

The graphics characters are limited to lowercase 'a' through 'z' and this DEMO just prints a small subset to see what a fun, kids level, 8 channel Logic-Analyser/Digital-Oscilloscope might look like.

This may not work in every *NIX style terminal but does work on default terminals using bash on OSX 10.7.5, PCLinuxOS 2009 and Debian Linux 6.0.x.

Tested on Python 2.5.x to 3.3.2 on the above platforms... (It might work on earlier versions of Python but untested.)

Enjoy finding simple solutions to often very difficult problems...

Bazza...

Create PDF at the end of a Unix pipeline with PDFWriter (Python)

2013-12-22T22:19:00-08:00

Python recipe 578794 by Vasudev Ram (commandline, linux, pdf, pipelining, reportlab, unix, xtopdf).

This recipe shows how to create PDF output at the end of a Unix or Linux pipeline, after all the text processing required, is done by previous components of the pipeline (which can use any of the standard tools of Unix such as sed, grep, awk, etc., as well as custom programs that act as filters).

A simple shell script to keep the wife off of your back... (Bash)

2013-12-09T20:05:49-08:00

Bash recipe 578781 by Barry Walker (apple, bash, linux, macbook_pro, reminder, script, shell).

How many times have you been asked to remember to do something from the other half whilst she is out for a short while.

For example: "You WILL check the dinner every few minutes won't you?"

And how many times did/do you forget?

Most of us have been there...

This is a simple kids level, practical learning, shell script that generates an "xterm" with your reminder inside every 30 seconds for a period of 3 seconds.

It is always be the active front window for 3 seconds at a time to _annoy_ you into remembering.

Usage: reminder "What you have to remember here using spaces AND double quotes."<CR>

Just reanme the downloaded script to reminder and remember to chmod it as required.

Just run it from your default terminal and when finished press Ctrl-C just AFTER the xterm window closes.

There is NO error detection so steer clear of any special characters in you reminder text.

Enjoy finding simple solutions to often very difficult problems...

A DEMO to show how to write text into the Python terminal Title Bar... (Python)

2013-09-17T17:55:53-07:00

Python recipe 578662 by Barry Walker (apple, bar, cygwin, demo, linux, macbook_pro, title, title_bar).

This DEMO is show how to write some text of your choice into the Title Bar of the Python terminal window.

Firstly it imports "time" just for this demo so that a simple time delay can be generated. Next the Python terminal window is written to for the 5 seconds of delay; see code. And finally the Title Bar is restored to normal...

A snapshot image can be seen here:-

http://wisecracker.host22.com/public/Title_Bar.jpg

Bazza...

Bash script to create a header for Bash scripts (Bash)

2011-11-02T01:57:07-07:00

Bash recipe 577862 by userend (auto, bash, create, emacs, gpl, header, linux, script, shell, vim). Revision 3.

This will create a header for a Bash script. It is a nice way keep a track of what your script does and when it was created, the author of the script, etc..

It will open the script automatically with one of the two most popular editor out there, Vim or Emacs! It also checks to see if there is a script with the same name in the current working directory so it will not overwrite another file.

v0.4: I had to kick this up a notch. I took the suggestion of "dev h" to add a chance for the user to select another name for the script.

Please leave comments and suggestions.

Pseudo-3D effect in text mode... (Bash)

2013-09-10T21:23:58-07:00

Bash recipe 578655 by Barry Walker (3d, apple, bash, color, colour, display, linux, macbook_pro, text).

This is just a simple DEMO to display a pseudo-3D effect using a bash script. It generates a recessed box and a button and writes some thext inside bot.

There are two pieces of code, one for Linux, and one for OSX 10.7.5...

The Linux version also works on OSX 10.7.5 but is harder to see so a near identical version using the default OSX terminal colours was craeted instead.

You will have to split the two code pieces up yourself to run...

Enjoy finding simple solutions to often very difficult problems...

Bazza...

A Simple Clock, Well Maybe Not That Simple... (Python)

2013-08-09T18:15:09-07:00

Python recipe 578633 by Barry Walker (amiga, apple, big, clock, digits, e_uae, linux, macbook_pro, time, winuae).

BIG_TIME.py

Remember this?

http://code.activestate.com/recipes/578610-a-simple-clock-well-maybe-not-that-simple/

And this?

http://code.activestate.com/recipes/578079-pure-fun-for-text-mode-python/?in=user-4177147

Well the Python version of the top URL has been uploaded to AMINET on 01-08-2013...

Now the big gun that complained about my fun Python upload and voted it down can see that this was a serious attempt ae viewing "Hello World!" in extra large xharacters.

This is the result in Python...

It is ONLY uploaded to AMINET and that is where it will stay.

If you want it then use the pointer inside code section.

Remember to change the BIG_TIME.py.txt file on AMINET to BIG_TIME.py...

Designed around a Macbook Pro OSX 10.7.5 for the Classic AMIGA platforms and works on Debian 6.0.x and PCLiuxOS 2009 using Python versions 1.4.0 to 3.3.2 inclusive...

Although the description in the AMINET readme below is for an AMIGA environment it does not take a genius to adapt it to the other platforms...

Boy was this difficult to get working in a single Python script...

ENJOY...

This is the AMINET readme file:-

Short: A Big Digital Clock Python Script. Author: wisecracker@tesco.net (Barry Walker) Uploader: wisecracker@tesco.net (Barry Walker) Type: dev/src Version: 1.00.00 Architecture: generic; m68k-amigaos

Distribution: Public Domain, Emailware.

============================================================================

Architectures: Classic AMIGAs, E-UAE and WinUAE.

MINIMUM Requirements Are:-

    68EC020 CPU and 2MB RAM total, example, a standard A1200(HD).
    WinUAE Version 1.5.3 minimum. 
    Standard OS3.0x install or better.
    Python Version 1.4.0 or higher.
    (Also, OSX 10.7.5, Debian Linux 6.0.x and PCLinuxOS 2009.)

History.

01-08-2013. Version 1.00.00:- Original upload to AMINET...

This is dedicated entirely to the AMIGA community and AMINET and will not be uploaded elsewhere.

To install just download the "BIG_TIME.py.txt" file and rename it to "BIG_TIME.py" without the quotes. Drag this file into your AMIGA PYTHON: volume and...

From a minimum of Python Version 1.4.0 prompt:-

>>> exec(open("PYTHON:BIG_TIME.py").read())<CR>

And away you go...

This code is/was designed to work in all versions of Python from 1.4.0 to 3.3.2 on at least the platforms shown in the Architectures: section.

It was developed entirely on a Macbook Pro OSX 10.7.5 and finalised using MEmacs for the AMIGA.

This is just a simple DEMO to show how to generate large digits in Python and put them to use as an _AT_A_GLANCE_ digital clock.

It starts up by generating all of the characters available for the DEMO for five seconds then goes into the clock proper.

As this code is multi platform AND multi Python version then it is issued as GPL2...

Enjoy finding simple solutions to often very difficult problems...

                            IMPORTANT:-
                            -----------

The Legal Stuff:-
-----------------

This Python script is issued under the GPL2 licence conditions.
The author is not responsible for any damage to, or loss of, or
failure of equipment or data caused in any way by the use of this
script. There is NO warranty with the use of this software release
and YOU USE IT AT YOUR OWN RISK.

Testing Evaluation:-
--------------------

All WinUAE, E-UAE and Classic AMIGA test conditions were/are running
standard OS3.0x/OS3.1x and using standard ~topaz 8~ fonts throughout.

I have no idea what strange configuration setups will create so refer
to the ~The Legal Stuff~ above.

Contact:-

Mr Barry Walker, G0LCU.

Email:- wisecracker@tesco.net

Author of the ~TestGear?~ projects in the ~docs/hard~ drawer of AMINET.

A very useful HardWare related site, (C) Anthony Hoffman, for modifications, schematics, repairs and the like is:-

                      http://amiga.serveftp.net/

============================================================================

A FUN Bash Shell Bomb-Out Error Sound... (Bash)

2013-07-14T19:31:13-07:00

Bash recipe 578605 by Barry Walker (apple, audio, bash, error_beep, error_sound, linux, macbook_pro, sound, sound_exchange, sox).

Do you remember the Bomb-Out icon(s) that appeared on some computers' SW and HW many years ago...

Well this is a matching sound to go with it and can be used as a critical error sound.

It sounds like a bomb being dropped from an aeroplane and is purely a shell sript only.

It is set up to run SOund eXchange, SOX, but just by editing the code "/dev/dsp" can be used instead.

Read the code for more informastion.

Enjoy...

Bazza...

DEMO - Generate A Crude 1KHz Sinewave Using A BASH Script. (Bash)

2013-03-01T19:41:47-08:00

Bash recipe 578477 by Barry Walker (audio, bash, demo, generator, linux, shell, sinewave, sound).

A very simple crude sinewave generator using a BASH script inside a Linux Terminal.

The file required is generated inside the code and requires /dev/audio to work.

Ensure you have this device, if not the download oss-compat from your OS's repository...

It lasts for about 8 seconds before exiting and saves a 65536 byte file to your working directory/drawer/folder as sinewave.raw.

Use an oscilloscope to check the waveform generated...

It is entirely Public Domain and you may do with it as you please...

Enjoy finding simple solutions to often very difficult problems... ;o)

Bazza, G0LCU...